micro/sys 3730 park place, montrose, ca 91020 (818)244-4600 fax (818)244-4246 email: info@embeddedsys.com pc/104 standard example code for all functions c-code/mathcad ? for advanced algorithms any micro/sys cpu with pc/104 expansion connector high accuracy analog and digital i/o for pc/104 MPC560 features software support compatible hardware mounting/packaging the MPC560 provides up to 32 single-ended 16- bit analog inputs that are fault protected to 40v. the analog input section offers individual channel selection of single-ended or differential modes in any combination. the MPC560 also features basic and autoscan modes. basic mode directly controls all modes, gains, channel selection, and filters. with autoscan mode, a user can preset individual channel attributes ? channel on/off, mode, gain, and lowpass filter in on-board ram. in autoscan mode, a pacer clock and the dma controller automatically move samples to system memory. the analog input includes a low-drift reference, noise-protected by a faraday shield. 32 channels of 16-bit analog input fault protection on analog/digital ultra-low noise design dsp and noise analysis software low-pass filtering 14-bit, 4-channel dac digital i/o, counter/timer 5v only operation from pc/104 extended temperature range available the optional 14-bit analog outputs have full- scale output of 10.1v. the digital-to-analog converter is noise-protected by a faraday shield. each output has a 1-pole lowpass filter. twelve digital i/o lines can be individually set for input or output, with fault protection against power sequencing and static discharge. all analog power supplies are generated from the 5v input. the on-board analog supplies include input and output filtering, and post- regulation of the initial converters, providing low- noise and stable power.
p c/ 1 0 4 fpga, read, write, irq, dma 14 bit dac power supply ref 16 bit a/d filter/ buffer esd dio, ctr, tmr 12 lines 4 channels ao fault protection, mux, gain, lpf 32 channels ai specifications: mechanical: pc/104 standard 3.55" (plus i/o region) x 3.775" power requirements: +5v 5% at 500ma environmental: 0 - +70c operating -40 - +85c operating, -et version 5%-95% relative humidity, non-condensing pc/104 interface: 16-bit transfers irq 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15 supported dma 5, 6, 7 supported digital i/o: 12 multi-function ttl-level bit selectable i/o at 8ma sink/source ext-trigger, ext-pacer clock, user i/o any/all inputs can generate an irq read-back function on outputs analog inputs: 16-bit, 32-channels individually selected for single/differential adc conversion time of 5usec -3db typical full-power response of input circuitry: 20vpp @35khz, 5vpp @ 100khz each channel can be set by software for the following attributes: on/off, single/differential, input range of 5.05v or 10.1v, lowpass filter(1khz or 100khz) default basic mode from reset allows readings of individual channels from software directly with eoc being polled/irq. auto-scan mode waits for an ext-trigger or software to start the pacer-clock to systematically run through each channel with its preset values and store the data into cpu dram with dma analog outputs: 14-bit, 4-channels 10usec dac settling time each channel has a 1-pole reconstruction filter and output buffer 10.1v output micro/sys 3730 park place, montrose, ca 91020 (818)244-4600 fax (818)244-4246 email: info@embeddedsys.com
micro/sys 3730 park place, montrose, ca 91020 (818)244-4600 fax (818)244-4246 email: info@embeddedsys.com counter/timer: 1mhz 16-bit timer for pacer-clock external connections: 50-pin header for analog input 16-pin header for digital/counter/timer i/o 10-pin header for analog output ordering information: MPC560 16-bit, 16-channel analog input, digital i/o MPC560 -et 16-bit, 16-channel analog input, digital i/o, extended temperature operation 560opt11 16-bit, 32-channel analog input, digital i/o 560opt12 14-bit, 4-channel analog output add -et to option for extended temp operation related products: ca5049 50-pin to 50-pin ribbon cable ca4002 16-pin to 16-pin ribbon cable ca5052 10-pin to 10-pin ribbon cable tb5001 breakout board, 50-point terminal strip mathcad trademark mathsoft engineering and education, inc.
|
